Products

ROBERTS 6280 is an acrylic pressure sensitive adhesive with good plasticizer migration resistance. It may be used as a releasable/re-positionable adhesive or as a permanent installation, if flooring is installed while adhesive is still wet.

Available Sizes:
R6280-4 – 4 gallon Plastic Pail
R6280-1 – 1 gallon Plastic Pail
R6280-0 – 1 quart Plastic Pail

Available Blade Packs:
10-433 - 10 Blade Pack (10 packs/case) (100 blades)
10-429 - 100 Blade Quick Blade Dispenser (5 packs/case) (500 blades)
10-434 - 100 Blade Pack - Bulk (10 packs/case) (1,000 blades)

ROBERTS 6300 is a high performance pressure sensitive adhesive which may be used to install carpet tiles, commercial carpet cushion, fiberglass reinforced sheet vinyl, luxury vinyl tiles and heterogeneous sheet vinyl and tile. This product dries quickly and offers a high shear strength making it the adhesive of choice for commercial installations where performance is key.

Available Sizes:
R6300-4 – 4 gallon Plastic Pail
R6300-1 – 1 gallon Plastic Pail

Replacement blades for the following Roberts products:
10-154-3 Universal Seam Cutter
10-616-2 Conventional Carpet Trimmer
10-617GT GT Carpet Trimmer
10-920-6 Professional Utility Knife

ROBERTS Air Glider is built with a 1.75HP, 120V blower motor, and can lift up to 750 lbs. Using hovercraft lifting principles, the glider is simple to use and virtually eliminates the risk of back injury. A single user can easily move commercial, industrial and residential equipment, machinery and appliances without damaging floors.

ROBERTS Base Board Molding Pry Bar and Lifter is the perfect tool to remove molding. A must-have tool for floor installers, its curved design provides the precise angles and optimal leverage you need to effectively pull base molding and tack strip, especially in places where a large pry bar won’t work. Manufactured from high carbon forged steel with bright nickel plating, its upgraded deep bevel nail slots ensure easy, quick removal. This versatile tool is 10-1/2 in. long and built to last – yet small enough to fit in your toolbox.

ROBERTS 5015 is an adhesive with a strong initial grab to hold carpet pads in place quickly. It's a superior adhesive developed for the adherence of carpet pads prior to the installation of stretch-in carpet.

Available Sizes:
R5015-1 – 1 gallon Metal Can

ROBERTS 5505 Urethane Adhesive Remover is a superior cleaner to aid in the removal of fresh and dried adhesive from flooring surfaces and tools. Also available as wipes

Available Sizes:
R5505 – 24 ounce Plastic Bottle
R5505-W – 60 Wipes

ROBERTS 8100 Superior Adhesive Remover is a ready-to-use, professional strength cleaner for the speedy removal of adhesives and carpet seam sealers. This fast acting cleaner is clear in color, and has the ability to remove wet adhesives without a trace. This remover may be used in commercial or residential spaces.

Available Sizes:
R8100-24 – 24 ounce Plastic Bottle

Available Tape Size:
1-7/8" x 100' roll (12/cs) - 50-040

ROBERTS 8250 is a commercial strength floor polish for use on virtually any flooring surface - hardwood, laminate, ceramic tile, sheet vinyl, LVP/LVP, VCT,
linoleum, rubber tiles. ROBERTS 8250 quickly restores luster and shine to floors. May also be high-speed buffed to a high gloss


Available Sizes:

R8250-1 – 1 gallon Plastic Jug

The ROBERTS 25" Pro Flooring Cutter is a guillotine-style cutter manufactured to cut precise, clean-edges on all types of flooring materials. The large cutting table stabilizes longer planks while the extendible handle provides extra leverage for more cutting power. This extra power is great not only for cutting laminate and engineered wood but also for cutting a variety of other flooring materials such as carpet tile, vinyl flooring, vinyl siding, VCT tiles, rubber, foam and more.

Looking for Replacement Blades? Click Here

3/4" Fluted Masonry Nails (5 lb. Bag) (10/cs)

1-1/4" Elasticel (Acoustical) Nails (5 lb. Bag) (10/cs)

ROBERTS 1540 ALL-IN-ONE is a single step, 100% solids moisture-cure urethane formula designed to perform as an adhesive, moisture vapor barrier,
crack suppressant and sound reducer. ROBERTS 1540 adhesive is formulated to bond engineered wood, solid wood and teak bamboo flooring and provides
moisture control on concrete slabs (up to 20 lbs. MVER or 90% RH); once cured the adhesive forms a water-resistant membrane.


Available Sizes:
R1540-4 – 4 gallon Metal Pail

Available Nail Sizes:
36-114 - 1-1/4" Drive Screw Nails Unichrome, with 3/16" Nail Head (1 lb. Bag) (50/cs)
37-114 - 1-1/4" Drive Screw Nails Brass, with 3/16" Nail Head (1 lb. Bag) (50/cs)

ROBERTS 1030 is a solvent-free, brush-grade, latex-based contact cement. It may be used to bond a wide variety of surfaces and offers a high strength, heat resistant bond. Finished assemblies can be used immediately.

Available Sizes:
R1030-1 – 1 gallon Plastic Pail

The Pro Carpet Knee Pads are a must-have for any installer.

ROBERTS heavy duty carpet blades are constructed of high quality steel, yielding clean and professional results. These precision sharpened blades deliver sharp, clean and fast cuts. Round corner blades help prevent cutting beneath the carpet and run along the subfloor without damaging it. ROBERTS carpet blades fit most, if not all, standard carpet knives. Replacing a carpet knife's blade helps maintain optimal cutting performance.

Available Blade Packs:
10-490 - (10-Pack) Round-End Carpet Blades
10-491 - (100-Pack) Round-End Carpet Blades w/ Quick Blade Dispenser

ROBERTS heavy duty carpet blades are constructed of high quality steel, yielding clean and professional results. These precision sharpened blades deliver sharp, clean and fast cuts. Round corner blades help prevent cutting beneath the carpet and run along the subfloor without damaging it. ROBERTS carpet blades fit most, if not all, standard carpet knives. Replacing a carpet knife's blade helps maintain optimal cutting performance.

Available Blade Packs:
10-492 - (10-Pack) Square-End Carpet Blades
10-493 - (100-Pack) Square-End Carpet Blades w/ Quick Blade Dispenser

The ROBERTS VCT Seam Roller is essential to complete any vinyl composition tile (VCT) and sheet vinyl flooring installation, and is suitable for wall base installations. The polished steel roller smoothly glides on 2 ball bearings for an even finish. The angled soft grip handle is designed for superior grip and better leverage. The 10-960 seam roller is 8 in. long and weighs approximately 2 lbs. 2 oz.

The ROBERTS Patent Pending Dual Expansion Joint Spacer is the only spacer you'll need for your floating and glue down vinyl, laminate and hardwood flooring jobs. Not only do they space out 1/4 in. and 1/2 in. expansion gaps, these spacers also form 1 in. thresholds. Expansion joints and thresholds leave a perimeter around your plank floors for expanding and contracting without buckling, increasing the longevity of your installation. This all in one spacer makes custom flooring jobs easy and won't tip over during installation.

Install vinyl, laminate and hardwood flooring like a professional with the ROBERTS Pro Flooring Installation Kit. This kit includes a tapping block, pull bar, double faced mallet and 30 expansion joint spacers that won't tip over during installation. This kit is reusable for future wood and vinyl flooring projects.

Maximize your utility knife performance with the ROBERTS Hawk Utility Blade. This blade is constructed of high performance SK2 steel, the same material used in power saw blades and drill bits, so it will stand up to everyday cutting and trimming. With the fine point, this blade will make precise cuts more comfortably than standard utility knife blades. This concave hook blade cuts acrylic light panels, LVP, vinyl tile, rubber and flooring underlayment.

Replacement blades for ROBERTS Knives:
10-221 Pro Utility Knife
10-920-6 Professional Fixed Blade Utility Knife
10-218F Big Fatso Multipurpose Knife with Quick Blade Change