Products

ROBERTS 1902 is a special blend of solvents that may be used for cleaning and removal of solvent-based products or to thin ROBERTS solvent-based contact cements.

Available Sizes:
1902RB001 – 946 mL / 1 U.S. quart Metal Can

ROBERTS 6040 is a superior-grade, solvent-based carpet adhesive developed for exterior installations of most types of outdoor commercial carpets and artificial turf.

Available Sizes:
6040RB35U – 13.25 L / 3.5 U.S. gallon Metal Pail

ROBERTS 6700 adhesive was designed for exterior or interior carpet installation and is solvent-free for reduced health risks, a lower environmental footprint and high initial grab. This non-flammable adhesive may be used in areas where flammable adhesives pose a health risk due to fumes or flashback fires. Use this adhesive to adhere most indoor/outdoor carpets with polypropylene, rubber-backed (foam, marine, waffle), urethane and tufted, woven or non-woven/needle-bond backings. For best results, keep in mind that high temperature and low humidity will cause the adhesive to cure faster.

Available Sizes:
6700RB015 – 15.14 L / 4 U.S. gallon Plastic Pail
6700RB004 – 3.78 L / 1 U.S. gallon Plastic Pail
6700RB001 – 946 mL / 1 U.S. quart Plastic Pail

ROBERTS 8502 Latex Carpet Seam Sealer is recommended for seam sealing carpets, sealing raw edges, binding, strengthening worn backings and applying new backings on area rugs. ROBERTS 8502 may also increase slip resistance on mats or rugs. ROBERTS 8502 contains UV tracers for easy detection.


Available Sizes:
8502RB001 – 946 mL / 1 U.S. quart Tube

ROBERTS 8415 is a solvent-based commercial-grade adhesive developed to seam most types of carpet and to prevent edge raveling. May also be used to repair bubbles in installations.

Available Sizes:
8415RB004 – 3.78 L / 1 U.S. gallon Metal Can
8415RB001 – 946 mL / 1 U.S. quart Bottle

The ROBERTS 8 oz. Universal Carpet Seam Sealer is a solvent-free formula, developed for seaming most types of carpet to prevent unraveling and delaminating. This sealer may also be used to repair bubbling in existing carpet. This formula dries in as little as 24 hours and is easy to clean when wet. The refillable applicator bottle holds up to 8 oz.

Available Sizes:
8015RB001 – 946 mL / 1 U.S. quart Plastic Jug
8015RB250 – 236 mL / 8 U.S. ounce Tube

ROBERTS 4020 is a premium solvent-based adhesive with a powerful initial tack and high shear strength to prevent movement of padding during carpet installation. This superior-grade, permanent bonding adhesive was developed for quick installations, in both residential and commercial applications.

Available Sizes:
4020RB004 – 3.78L / 1 U.S. gallon Metal Can

ROBERTS 7350 UNIVERSAL Flooring Adhesive is a high quality, high solid cross-linking formulation designed specifically for installing luxury/solid vinyl tiles/planks and WPC flooring. This POWERHOUSE pressure sensitive adhesive has tremendous bond and shear strengths, making it ideal for use with large format vinyl tiles, plus it has excellent moisture and plasticizer migration resistance. ROBERTS 7350 can also be used to adhere carpet tiles and specialty vinyl flooring underlayment, such as ROBERTS Cork Pro Plus, to the subfloor. It may also be used to install VCT, homogeneous and heterogeneous sheet flooring.

Available Sizes:
7350RB415 – 15.14 L / 4 U.S. gallon Plastic Pail
7350RB004 – 3.78 L / 1 U.S. gallon Plastic Pail
7350RB001 – 946 mL / 1 U.S. quart Plastic Pail

ROBERTS 2350 HARD-SET Resilient Flooring Adhesive is a high performance acrylic formulation that offers up front pressure sensitive characteristics, then turns to a hard-set and develops a strong bond to withstand heavy rolling loads. Designed for the installation of most solid/luxury vinyl-backed and rubber floor coverings and offers the flexibility of installing over porous and non-porous substrates.

Available Sizes:
2350RB015 - 15.14L / 4 U.S. gallon Plastic Pail
2350RB004 - 3.78 L / 1 U.S. gallon Plastic Pail
2350RB001 - 946 mL / 1 U.S. quart Plastic Pail

The Roberts 5" (13cm) Carpet Seam Roller is designed with steel star wheel rollers, specifically for use on loop pile carpets. The extra-wide head reduces dishing in seam areas.

The Roberts Deluxe Seam Roller will professionally finish even the most demanding carpet seams. The extra wide 4-1/2" (11cm) rollers both reduce seam peaking and maximize adhesive penetration to ensure strong long-lasting seams.

ROBERTS 4" Cut Pile Seam Roller is ideal to seam cut-pile and Saxony carpets, as well as vinyl flooring. The smooth roller head seams the carpet without fraying the yarn ends, and delivers seams that have the carpet backings flush with one another, without gaps or overlays. This is a great tool to create seams that are invisible to the eye – at great value.

The Roberts Conventional Carpet Trimmer neatly trims carpet at the wall and under toe kicks. The anti-slip, 5-position handle moves easily in tight areas.

Looking for replacement blades? Click here

The Roberts Golden Touch Carpet Trimmer trims carpet precisely at the wall and under toe kicks. Equipped with a dual spring steel blade clip to fully secure blades in place and prevent loosening over time. Classic, thinner handle for comfort and easy maneuvering when cutting.

Looking for replacement blades? Click here

This Multi-Purpose Wall Trimmer is great for cutting conventional carpet, plus soft vinyl sheet goods, carpet tiles and cushion back for glue down carpets. The anti slip handle moves easily in tight areas.

Looking for replacement blades? Multi-Purpose Wall Trimmer uses Hooked Blades and Heavy Duty Slotted Blades

Efficiently cut most loop carpet of all thicknesses with the ROBERTS Loop Pile Cutter. The 2-blade design accommodates both left and right positions for cutting closer to the yarn edge. This carpet cutter features a comfortable cutting angle and easy blade insertion.

For Replacement Blade, use:
10-436 - Heavy Duty Slotted Blades

The Roberts Loop Pile Cutter is designed to efficiently cut most loop carpet regardless of thickness. The unique two-blade design accommodates both left and right positions for cutting closer to the yarn edge.

Looking for replacement blades? Click here

The Roberts Cushion Back Cutter was designed with 2 adjustable blades for cutting all thicknesses of cushion-back and convential carpets. The cutter is also equipped with a direct-pressure blade knob, to tightly hold blades in place for precise cuts.

Looking for replacement blades? Click here

The Roberts Cushion Back Cutter was designed with 2 adjustable blades for cutting all thicknesses of cushion-back and convential carpets. The cutter is also equipped with a direct-pressure blade knob, to tightly hold blades in place for precise cuts.

Looking for replacement blades? Click here

The ROBERTS Loop Pile Carpet Cutter is designed for top and bottom cutting. The quick-release blade mechanism makes changing the blade fast and easy. The 1-piece durable nylon construction offers long-lasting performance.

For Replacement Blade, use:
10-436 - Heavy Duty Slotted Blades

The Roberts 10" (25 cm) Carpet Shears are made in the USA from high quality carbon steel and precision ground for sharp cutting edges. Designed with extra wide openings to accommodate large hands, the handle is cushioned with a vinyl coating for comfort.

The Roberts 8" (20cm) Napping shears feature an offset handle for easy and level napping of carpet fibers. The precision ground blades have a high polished steel finish and the handles are cushioned and vinyl coated for comfort.

The Roberts Duckbill Napping Shears are the perfect tool for properly trimming carpet imperfections. The offset handle prevents accidental gouging when napping, and the blades are crafted from high-carbon steel for durability.

The Roberts Junior Power Stretcher is an economical choice without sacrificing quality or performance.

Power-Lok Value Kit Includes*:
Power Unit
Tail Block with Wheels
(6) 3' (0.9m)Extension Tubes
Adjustable Locking Tube
Transfer Tube
Tube Carrying Case
Stretcher Carrying Case

Replacement Parts:
10-237-50 Replacement Power Head

*Also available as a Standard Set (10-237), includes: Power Unit, Tail Block w/ Wheels, (3) Extension Tubes, Adjustable Locking Tube, Transfer Tube and Stretcher Carrying Case.

Stretch carpet during installation with the ROBERTS 12-Piece Power-Lok Carpet Stretcher Value Kit. The 10-254V was crafted with a host of features that make this the ideal power stretcher for professional installers. The adjustable pin depth setting makes this unit compatible with all carpet thicknesses. The swivel head with a handle and non-marring tail block facilitate quick and safe stretching with less repositioning. This kit stretches carpet up to 38 ft. and includes the ROBERTS 10-250 Adjustable Locking Tube for fast incremental adjustments. The rolling carrying case and tube carrying case lock together for easy storage and transportation.

Value Kit Includes:
- Power-Lok Unit
- Tail Block with Wheels
- (6) 3' Extension Tubes
- Adjustable Locking Tube
- Transfer Tube
- Tube Carrying Case
- Stretcher Carrying Case

Replacement Parts:
10-254-50 - Replacement Power Head

*Also available as a Standard Set (10-254), includes: Power-Lok Unit, Tail Block w/ Wheels, (3) Extension Tubes, Adjustable Locking Tube, Transfer Tube and Stretcher Carrying Case.

Stretcher Tubes for use with Roberts 10-254 Power-Lok Stretcher and 10-237 Junior Power Stretcher. Also fits most standard carpet stretchers.

Available Options:
10-250 Adjustable Locking Tube
10-230-10 3' Steel Stretcher Tube
10-235-10 3' Aluminum Stretcher Tube
10-235-05 5' Aluminum Stretcher Tube

The Roberts Economy Carpet Installation Kit contains five key tools needed for carpet installation, which come conveniently packed in the included plastic tool box.

Economy Carpet Installation Kit Includes:
Plastic Tool Box
Universal Seam Cutter – 10-154-3
4" (10cm) Loop Pile Seam Roller – 10-169
Professional Carpet Knife – 10-252
4" (10cm) Extra Wide Stair Tool – 10-521
7" (18cm) Duckbill Napping Shears – 10-586-3

Interlocking Stretcher & Tube Cases for use with ROBERTS 10-254 Power-Lok Stretcher and 10-237 Junior Power Stretcher.

Available Options:
10-230-40 Stretcher Case (stretcher not included)
10-230-3K Tube Case, with (3) 3' (0.9m) Extension Tubes

For use with Roberts 10-254 Power-Lok Stretcher and 10-237 Junior Power Stretcher.

The ROBERTS 10-128 Carpet Stretcher was designed to quickly and accurately match patterns during carpet installation and repair. This stretcher may also be used to correct bowing and skewing in new carpet, and stretch carpet across a room. Measuring less than 2 ft. long, this stretcher is compact and easy to maneuver in the room. Constructed of die cast aluminum, the 10-128 holds up to 300 lbs. of stretch tension. This stretcher includes a removable powerhead, tailblade attachment and an automatic locking feature.

Replacement Parts:
10-117-04 - Powerhead Replacement Unit
10-107-03 - Tailblade Replacement Unit

The Roberts Power Stretcher Tail needle sharp point bites through carpet and pad into wood subfloor for a firm solid stretch.

Roberts Deluxe Grip Pouch holds tools firmly in place with special leather inserts grips. This professionally constructed leather pouch is slotted to fit directly on the belt.

The ROBERTS 24" Steel Tool Box is built to last with heavy-duty steel construction and a premium baked enamel finish. It contains three durable hasp latches for security and a top handle that is comfortable and mounted securely to the lid. Also comes oufitted with additional side handles to make transporting easy for one or two people. Steel Tool Box features an innovative, built-in, vented nylon plate below the storage tray that doubles as a seaming weight. The nylon vented base has multiple channels and air holes to allow moisture to escape away from the carpet while seaming. The storage tray was designed with unique staple and nail compartments to eliminate boxes from sliding during transport and damaging the staple strips.

*Tools shown in image not included.

The ROBERTS 10-750 Carpet Installation Kit contains essential hand tools needed to professionally install wall to wall carpet. The kit includes 22 tools, conveniently packed in a 24 in. steel tool box. This kit is an economical alternative to purchasing each item separately.

Deluxe Carpet Installation Kit Includes:
24" Steel Tool Box – 10-161
Strip Cutter – 10-108
Staple Hammer – 10-109
20 oz. Ripping Hammer – 10-114
GT Cushion Back Cutter – 10-146GT
Nail Driving Bar – 10-151
GT Loop Pile Cutter – 10-152GT
Conventional Carpet Trimmer – 10-616-2
4" Loop Pile Seam Roller – 10-169
Professional Carpet Knife – 10-252
Deluxe Grip Pouch – 10-260
Chalk Reel – 10-303S
White Chalk Refil (8 oz.) – 10-321
Deluxe Knee Kicker – 10-412-2
Base Molding Lifter – 10-510-3
4" Extra Wide Stair Tool – 10-521
EZ Tuk Carpet Tucker – 10-522-4
7" Duckbill Napping Shears – 10-586-3
Professional Fixed Blade Utility Knife – 10-920-6
Linoleum Knife – 10-931
Measuring Tape (30') – 10-140
Row Finder/Separator – 10-517
White Rubber Mallet – 61613

ROBERTS 1407 Engineered Wood Flooring Adhesive is an acrylic urethane adhesive designed for the installation of engineered and parquet wood flooring up to 1/2 in. thick and 5 in. wide. This solvent-free adhesive meets the strict requirements of the South Coast Air Quality Management District and may contribute one LEED point for "Low-Emitting Material-Adhesive and Sealant" (IEQ Credit 4.1). The 1407 holds trowel ridges for optimum wood contact, grants excellent working time, and cleans up easily with soap and water. This low VOC, environmentally friendly formulation is low odor and odorless when dry.


Available Sizes:
1407-4 – 4 gallon Plastic Pail
1407-1 – 1 gallon Plastic Pail
1407-30C – 30 ounce Cartridge

ROBERTS 1406 Tongue & Groove Flooring Adhesive is a high strength PVA adhesive with a specialized applicator tip for precise placement of the adhesive.


Available Size:
1406RB500 – 473 mL / 1 U.S. pint Bottle

ROBERTS RB40 HEAVY-DUTY Construction Adhesive is specially formulated to permanently bond wood subfloors, plywood, paneling, fibre board and more. This rapid tacking and flexible adhesive eliminates squeaks, bounce and absorbs vibration.


Available Sizes:
40RB001 – 946 mL / 1 U.S. quart Plastic Pail
40RB825 – 887 mL / 29 U.S. ounce Tube

The ROBERTS Silicone Moisture Barrier Underlayment was designed to protect floors from moisture, without trapping it underneath the floor covering. Silicone Moisture Barrier is made from repurposed paper that is environmentally safe and made of 100 percent recycled contents. Install with the smooth side up, for easily marking chalk lines and sliding planks into position.

ROBERTS 2072 is a superior, commercial-grade adhesive designed specifically for the installation of linoleum flooring. This adhesive is designed with an early strength to grab and hold stiff linoleum floors in place.


Available Sizes:
2072RB020 – 18.9 L / 5 U.S. gallon Plastic Pail

Roberts Underlayment Seam Tape is perfect for foam underlayment under floating floors, carpet padding and more! This versatile, "Easy Tear" tape provides an essential moisture resistant seal, necessary even for underlayment with attached lip and tape. Underlayment Seam Tape is also great packing and general repairs.

ROBERTS 1010 is a brush-grade contact cement with powerful bonding power. It forms high strength bonds on contact. Finished assemblies can be used immediately. Bonds made with ROBERTS 1010 are highly resistant to the effects of water and weather elements.


Available Sizes:
1010RB020 – 20 L / 5.28 U.S. gallon Metal Pail
1010RB35U – 13.25 L / 3.5 U.S. gallon Metal Pail
1010RB004 – 3.78 L / 1 U.S. gallon Metal Can
1010RB001 – 946 mL / 1 U.S. quart Metal Can

Roberts Comfort Grip Stainless Steel Trowels are made for the professional. Designed with comfort in mind and manufactured with the highest quality materials for an extended life. All Roberts Comfort Grip trowels blades have a 10º angle.

Available Notch Sizes:
1/16" x 1/16" x 1/16" (1.6 x 1.6 x 1.6mm) Square-Notch – 10-823
3/32" x 3/32" x 3/32" (2.4 x 2.4 x 2.4mm) Flat V-Notch – 10-833
1/16" x 1/32" x 1/32" (1.6 x 0.8 x 0.8mm) U-Notch – 10-829

ROBERTS Moisture Barricade Polyethylene Film is designed for use with laminate and engineered wood flooring underlayment. Moisture Barricade provides a barrier for moisture protection over cement slabs. This 120 sq. ft. roll opens to a full 12 ft. x 10 ft. area and includes an adhesive strip for 3 inch overlaps with additional sheets.

The Notched Trowel offers both quality and comfort. This trowel features a smooth sanded poplar hardwood handle connected to a durable aluminum die-cast shank. Select Roberts trowels also designed with a 10º blade angle (marked *).

Available Notch Sizes:
1/16" x 1/16" x 1/16" (1.6 x 1.6 x 1.6mm) Square-Notch* – 10-810
1/16" x 1/16" x 3/32" (1.6 x 1.6 x 2.3mm) U-Notch – 49736
3/32" x 3/32" x 3/32" (2.3 x 2.3 x 2.3mm) Flat V-Notch* – 10-820
1/8" x 1/8" x 1/16" (3 x 3 x 1.6mm) Flat V-Notch* – 49737
1/16" x 1/32" x 1/32" (1.6 x 0.8 x 0.8mm) U-Notch* – 10-816
1/16" x 1/32" x 5/64" (1.6 x 0.8 x 2mm) U-Notch – 49738
3/16" x 1/4" x 1/2" (5 x 6 x 13mm) Flat V-Notch* – 49730

The Economy Trowels are designed for the do-it-yourself installer in-mind. This trowel features a cold-rolled steel blade, available in a number of notch styles.

Available Notch Sizes:
1/16" x 1/16" x 1/16" (1.6 x 1.6 x 1.6cm) Square-Notch – 10125
1/8" x 1/8" x 1/8" (3 x 3 x 3mm) Square-Notch – 10123-12
1/16" x 1/16" x 3/32" (1.6 x 1.6 x 2mm) U-Notch – 10121-12
1/8" x 1/8" x 1/16" (3 x 3 x 1.6mm) Flat V-Notch – 10137-12
1/16" x 1/32" x 1/32" (1.6 x 0.8 x 0.8mm) U-Notch – 10111-12
1/16" x 1/32" x 5/64" (1.6 x 0.8 x 2mm) U-Notch – 10122
1/4" x 1/4" x 1/4" (6 x 6 x 6mm) Flat V-Notch – 10142-12
3/8" x 5/16" (9.5 x 8mm) V-Notch – 10143
1/4" x 3/16" (6 x 5mm) TigerTooth® – 10144

The Roberts Wall Base Spreader features a durable, cold-rolled steel blade that conveniently fits into a 1 quart (946mL) can for easy adhesive application.

Notch Size:
3/16" x 5/32" (5 x 4mm) V-Notch

This Economy Trowel is designed for the do-it-yourself installer in-mind, with added value by including two notch sizes.

Notch Size:
1/16" x 1/16" x 1/16" (1.6 x 1.6 x 1.6mm) Square-Notch AND 1/16" x 1/32" x 1/32" (1.6 x 0.8 x 0.8mm) U-Notch

Trim and cut carpet like a Pro with ROBERTS Professional Carpet Knife with Push Button for Quick Blade Change. Featuring a special thumb stop design for increased cutting pressure, and a contoured slip-resistant handle for a firmer grip, this knife is a favorite of installers for its easy push-button that allows quick blade changing, and the convenient space inside the handle that allows you to store additional blades. Knife includes 3 professional grade blades.

For Replacement Blades, use:
10-436 - Heavy Duty Slotted Blades

The ROBERTS Razor Blade Carpet Knife quickly cuts carpet during installation. This knife is constructed of die-cast aluminum for lightweight durability. The integrated blade storage and slip-resistant handle for safer cutting makes this carpet knife an easy choice for any carpet installer.

For Replacement Blades, use:
10-436 - Heavy Duty Slotted Blades

ROBERTS Cut and Jam Carpet Knife for cutting and tucking carpet is a favorite tool of carpet installers. It is uniquely designed to serve a double function: To cut carpet with one end and tuck carpet into gullies with the other end. Designed to easily open to change the blade, it includes safety thumb and blade guards. This rugged knife made of die cast aluminum, is lightweight, molded to fit in your hand, and includes a slip-resistant handle that assures a firm grip to cut with precision. The handle stores up to 10 additional heavy-duty slotted blades.

For Replacement Blades, use:
10-436 - Heavy Duty Slotted Blades