Roberts Consolidated

ROBERTS 1902 is a special blend of solvents that may be used for cleaning and removal of solvent-based products or to thin ROBERTS solvent-based contact cements.

Available Sizes:
1902RB001 – 946 mL / 1 U.S. quart Metal Can

The ROBERTS 25" (63.5cm) Pro Flooring Cutter is a guillotine-style cutter manufactured to cut precise, clean-edges on all types of flooring materials. The large cutting table stabilizes longer planks while the extendible handle provides extra leverage for more cutting power. This extra power is great not only for cutting laminate and engineered wood but also for cutting a variety of other flooring materials such as carpet tile, vinyl flooring, vinyl siding, VCT tiles, rubber, foam and more.

Looking for Replacement Blades? Click Here

10-8678 - Mozart Trimmer Blades (5-pack blister card) (10/cs)
10-8679 - Mozart Weld Rod spacer claw, 0.5mm (1 guide on blister card) (10/cs)
10-8700 - Mozart Weld Rod spacer claw, 0.7mm (1 guide on blister card) (10/cs)
10-041 - Fixing Attachments (Spares, 1 screw with 3 spring washers) (10/cs)

The ROBERTS Strip Cutter is designed to cut tackstrip and architectural strip without extra effort. This rugged cutter provides a powerful 8 to 1 cutting force.

Looking for Replacement Blades? Click Here

The ROBERTS Floor and Wall Scraper removes tough materials like stubborn glue and flooring, leaving surfaces smooth and prepped. The 18 in. handle was crafted with a cushioned grip and an ergonomic, ball cap at the end for more comfortable scraping, because tough jobs don’t need to be tough on the body. This scraper includes 1 high speed carbon steel blade that maintains a sharp edge.

4” Floor/Wall Scraper Replacement Blades Available:
10-442-10 (10 pcs.) (10/cs)
10-459 (40 pcs.) (10/cs)

4” Replacement scraper blades available:
- 10-442-10, 10 blade blister card (10 cards/case) 100 blades
- 10-459 Scraper blades (10cs) 40 blades

The ROBERTS Silicone Moisture Barrier Underlayment was designed to protect floors from moisture, without trapping it underneath the floor covering. Silicone Moisture Barrier is made from repurposed paper that is environmentally safe and made of 100 percent recycled contents. Install with the smooth side up, for easily marking chalk lines and sliding planks into position.

ROBERTS 1650 MAXCOMPLETE-EZ Hybrid Polyurethane Adhesive is a powerful adhesive manufactured for the installation of engineered wood, solid wood and bamboo flooring. Formulated to bond with concrete, plywood, and cement board, this moisture-cured polyurethane adhesive is highly elastomeric, allowing it to adapt to the natural expansion and contraction of wood, providing a moisture vapor barrier, and a sound reduction layer. This is a low odor, ZERO VOC, and LEED compliant adhesive. After 8 hours curing time, the floor is ready for light foot traffic.

Available Sizes:
1650-2 - 2 gallon Plastic Pail

ROBERTS 1530 MAXGRAB Polyurethane Adhesive is manufactured for the installation of engineered wood, solid wood, parquet, and bamboo flooring. Formulated to bond with concrete, plywood, and cement board, this moisture-cured polyurethane adhesive is highly elastomeric, allowing it to adapt to the natural expansion and contraction of wood. This adhesive has low odor, is LEED EQc 4.1 Compliant and has VOC less than 60. It has a curing time of approximately 6 to 8 hours for light foot traffic, and is easy to clean off by using ROBERTS 5505 Urethane / Multipurpose Adhesive Remover.

Available Sizes:
1530-4 - 4 gallon Metal Pail

ROBERTS 1550 MAXCOMPLETE Polyurethane Adhesive is manufactured for the installation of engineered wood, solid wood, parquet, and bamboo flooring. Formulated to bond with concrete, plywood, and cement board, this moisture-cured polyurethane adhesive is highly elastomeric, allowing it to adapt to the natural expansion and contraction of wood. It can be applied with a 1/4 in. Flat V-Notch trowel when moisture mitigation is NOT necessary and with a 1/4 in. x 3/16 in. Tiger Tooth trowel for moisture mitigation purposes. It covers approximately 30-35 sq. ft. per gallon with a curing time of approximately 6 to 8 hours for light foot traffic when applied with adhesive- only trowel, and 12 hours when applied with moisture-control trowel. Can be sanded after 18 hours. This adhesive has low odor, is LEED EQC 4.1 Compliant and VOC less than 60. It is easy to clean off by using ROBERTS 5505 Urethane Adhesive Remover.

Available Sizes:
1550-4 - 4 gallon Metal Pail

ROBERTS®8600 NOSEBONDTM is an advanced acrylic adhesive specially formulated for interior stair nose installation on wood, laminate, and rigid PVC properly prepared subfloors. This water-resistant adhesive featuring GoldGuard® antimicrobial product protection is
manufactured for interior use only, and ideal for wood moldings, wood trim installations and repairs. Low odor, enviro-friendly, solvent-FREE, and LED compliant with a VOC > 2 g/L, it has a curing time of 8 to 10 hours. It is easy to clean up with warm, soapy water when fresh, and with mineral spirits when dried.

Available Sizes:
8600-10C - 10 oz. cartridge (295 mL)