6700 Indoor/Outdoor Carpet Adhesive

Name: 6700 Indoor/Outdoor Carpet Adhesive
Brand: Roberts
SKU: 6700
Availability: OutOfStock

Home / Shop / Products / Adhesives / Carpet

6700 Indoor/Outdoor Carpet Adhesive

0 Reviews

$0.00

Home / Shop / Products / Adhesives / Carpet

6700 Indoor/Outdoor Carpet Adhesive

$0.00

Model Number: 6700

ROBERTS 6700 adhesive was designed for exterior or interior carpet installation and is solvent-free for reduced health risks, a lower environmental footprint and high initial grab. This non-flammable adhesive may be used in areas where flammable adhesives pose a health risk due to fumes or flashback fires. Use this adhesive to adhere most indoor/outdoor carpets with polypropylene, rubber-backed (foam, marine, waffle), urethane and tufted, woven or non-woven/needle-bond backings. For best results, keep in mind that high temperature and low humidity will cause the adhesive to cure faster.

Available Sizes:
6700RB015 – 15.14 L / 4 U.S. gallon Plastic Pail
6700RB004 – 3.78 L / 1 U.S. gallon Plastic Pail
6700RB001 – 946 mL / 1 U.S. quart Plastic Pail

Maximum quantity exceeded

Minimum purchase amount of 0 items is Required

Maximum purchase amount of 0 is Allowed

Brand: Roberts

Description
Customer Reviews (0)

For adhering most indoor/outdoor carpets and is ideal for decks, sunrooms and basements
Bonds with concrete, APA rated marine grade plywood, aged asphalt paving (hot applied), fiberglass and aluminum when surface is clean and roughened to promote bonding
Moisture Control Adhesive - up to 5 lbs. MVER and 80% RH
Up to 30 minutes open time, 60 minutes working time and 24 to 48 hours curing time
Approximately 65 to 75, 90 to 110 and 100 to 120 sq. ft. per gallon coverage for smooth, polypropylene/woven, and non-woven/rough-backed carpet installations respectively
Suggested for use with a 1/8 in. x 1/8 in. x 1/8 in. U-notch trowel, 1/8 in. x 1/8 in. x 1/16 in. V-notch trowel, or 3/32 in. x 3/32 in. x 3/32 in. V-notch trowel depending on carpet installation type
Enviro-friendly, solvent-free and LEED compliant; VOC < 1 g/L, SCAQMD Rule 1168
Protected by GoldGuard, an antimicrobial protection system that inhibits the growth of mold, mildew and odor causing bacteria in both wet and dry adhesives
CRI Green Label Plus Certified - GLP no. 36471
Non-flammable for safe use
10 year direct bond limited warranty
Recommended for covered exterior applications
May be used for artificial turf if the turf manufacturer suggests a latex based, full spread adhesive application
For best results: do not apply over asphalt roofs, EDPM sealed substrates or pressure treated plywood; and avoid hot, excessively wind or rainy conditions during outdoor installation