Wood

View 10 25 50 Showing all 7 Results
View Cart Product successfully added to your cart.
  • Engineered Wood Flooring Adhesive

    Engineered Wood Flooring Adhesive

    ROBERTS 1407 is an acrylic tri-polymer urethane adhesive designed for the installation of engineered and parquet wood flooring. Smooth and easy to trowel formula with great green grab


    Available Sizes:
    1407-4 – 4 gallon Plastic Pail
    1407-1 – 1 gallon Plastic Pail
    1407-30C – 30 ounce Tube
    $0.00

    Engineered Wood Flooring Adhesive

    $0.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • Tongue & Groove Flooring Adhesive

    Tongue & Groove Flooring Adhesive

    ROBERTS 1406 Tongue & Groove Flooring Adhesive is a high strength PVA adhesive with a specialized applicator tip for precise placement of the adhesive.


    Available Sizes:
    1406-P – 1 pint Plastic Bottle
    $0.00

    Tongue & Groove Flooring Adhesive

    $0.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • MAXCOMPLETE-EZ Polyurethane Wood Flooring Adhesive

    MAXCOMPLETE-EZ Polyurethane Wood Flooring Adhesive

    ROBERTS 1650 MAXCOMPLETE-EZ Hybrid Polyurethane Adhesive is a powerful adhesive manufactured for the installation of engineered wood, solid wood and bamboo flooring. Formulated to bond with concrete, plywood, and cement board, this moisture-cured polyurethane adhesive is highly elastomeric, allowing it to adapt to the natural expansion and contraction of wood, providing a moisture vapor barrier, and a sound reduction layer. This is a low odor, ZERO VOC, and LEED compliant adhesive. After 8 hours curing time, the floor is ready for light foot traffic.

    Available Sizes:
    1650-2 - 2 gallon Plastic Pail
    $0.00

    MAXCOMPLETE-EZ Polyurethane Wood Flooring Adhesive

    $0.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • MAXGRAB Polyurethane Wood Flooring Adhesive

    MAXGRAB Polyurethane Wood Flooring Adhesive

    ROBERTS 1530 MAXGRAB Polyurethane Adhesive is manufactured for the installation of engineered wood, solid wood, parquet, and bamboo flooring. Formulated to bond with concrete, plywood, and cement board, this moisture-cured polyurethane adhesive is highly elastomeric, allowing it to adapt to the natural expansion and contraction of wood. This adhesive has low odor, is LEED EQc 4.1 Compliant and has VOC less than 60. It has a curing time of approximately 6 to 8 hours for light foot traffic, and is easy to clean off by using ROBERTS 5505 Urethane / Multipurpose Adhesive Remover.

    Available Sizes:
    1530-4 - 4 gallon Metal Pail
    $0.00

    MAXGRAB Polyurethane Wood Flooring Adhesive

    $0.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • Wood Flooring Adhesive

    Wood Flooring Adhesive

    ROBERTS 1404 Wood Flooring Adhesive is an adhesive specifically designed to adhere 3, 5 and 7-ply engineered wood flooring and pre-finished parquet.
    It develops an excellent initial tack to assist in holding boards in place during installation which makes installation easier. It remains flexible and moves with the wood as it reacts to environmental changes.


    Available Sizes:
    1404-4 – 4 gallon Plastic Pail
    $0.00

    Wood Flooring Adhesive

    $0.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • NOSEBOND™ Stair Nose Adhesive

    NOSEBOND™ Stair Nose Adhesive

    ROBERTS®8600 NOSEBONDTM is an advanced acrylic adhesive specially formulated for interior stair nose installation on wood, laminate, and rigid PVC properly prepared subfloors. This water-resistant adhesive featuring GoldGuard® antimicrobial product protection is
    manufactured for interior use only, and ideal for wood moldings, wood trim installations and repairs. Low odor, enviro-friendly, solvent-FREE, and LED compliant with a VOC > 2 g/L, it has a curing time of 8 to 10 hours. It is easy to clean up with warm, soapy water when fresh, and with mineral spirits when dried.

    Available Sizes:
    8600-10C - 10 oz. cartridge (295 mL)
    $0.00

    NOSEBOND™ Stair Nose Adhesive

    $0.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • MAXCOMPLETE Polyurethane Adhesive

    MAXCOMPLETE Polyurethane Adhesive

    ROBERTS 1550 MAXCOMPLETE Polyurethane Adhesive is manufactured for the installation of engineered wood, solid wood, parquet, and bamboo flooring. Formulated to bond with concrete, plywood, and cement board, this moisture-cured polyurethane adhesive is highly elastomeric, allowing it to adapt to the natural expansion and contraction of wood. It can be applied with a 1/4 in. Flat V-Notch trowel when moisture mitigation is NOT necessary and with a 1/4 in. x 3/16 in. Tiger Tooth trowel for moisture mitigation purposes. It covers approximately 30-35 sq. ft. per gallon with a curing time of approximately 6 to 8 hours for light foot traffic when applied with adhesive- only trowel, and 12 hours when applied with moisture-control trowel. Can be sanded after 18 hours. This adhesive has low odor, is LEED EQC 4.1 Compliant and VOC less than 60. It is easy to clean off by using ROBERTS 5505 Urethane Adhesive Remover.

    Available Sizes:
    1550-4 - 4 gallon Metal Pail
    $0.00

    MAXCOMPLETE Polyurethane Adhesive

    $0.00
    Successfully Added to your Shopping Cart
    Adding to Cart...

Join Our Newsletter

Receive Special Offers & Promotions

Constant Contact Winner - Wood

Get Claim Help

Fill out the form below to get started.

[contact-form-7 404 "Not Found"]×